Using MFC for ActiveX Controls For most folks, we recommend using MFC because MFC controls are easy to write. You focus on your control's behavior, not the intricacies of OLE interfaces. And, with the new features of MFC 4.2, you can write controls that perform better and implement the cool new OCX 96 features
This topic describes how to register a Microsoft ActiveX object as the viewer or player for a particular media type (Multipurpose Internet Mail Extensions (MIME)). This registration is essential for Microsoft Internet Explorer to launch the correct player when interpreting the standard HTML A HREF tag or the Netscape-introduced EMBED tag
Palette Management for Active Document Objects The following sections describe issues related to palette management by OLE document objects. In general, the palette management scheme for document objects is the same as the scheme used for controls, except that document objects do not receive ambient properties from their container.
|
|
|
Computer Partners
The computer case includes motherboard spacers and screws. This helps set the motherboard in the case. Mount the spacers into the corners and to the proper side holes. It should match up with the holes in your motherboard.
If the motherboard has different jack arrangements from the case’s I/O (input/output) shield, use the shield that comes with the motherboard. Mount it from the inside of the case.
Now, to install the processor, raise the lever on the side of the CPU (processor) socket. The CPU’s pins are made in a way that it is possible to put the CPU into the socket only one way. Therefore, if you are doing it right, it should easily fit.
Hold the processor down and close to the lever. Before installing the CPU cooler, put thermal compound onto the top of the CPU (on core).
Mount the processor cooler on top of the processor. Press down lightly. Clip the heat sink to the processor socket. Attach the CPU cooler’s fan power to the motherboard’s fan header. It is usually labeled “CPU FAN 1”.
Plug in the memory module to the long sockets called DIMM’s. Unlock both tabs and push the memory straight down. The clips on the slot’s sides should close. Carefully push the motherboard against the I/O shield. Put in and tighten the motherboard screws. Do not force it.
The brown slot nearest to the processor is the AGP slot meant for the video card. Insert the video card evenly in the slot provided. Screw the card into place. Make sure that your AGP video card is placed properly.
|
|
|
